Common Mode Choke Coils For power line UF series Type: Two sections bobbin type for high frequency UF Issue date: September 2011 * All specifications are subject to change without notice. * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (1/4) Common Mode Choke Coils For Power Line Conformity to RoHS Directive UF Series TDK common mode choke coils(line filters) are used in a wide range of prevention of electromagnetic interference(EMI) and radio frequency interference(RFI) from power supply lines and for prevention of multifunctioning of products such as measuring equipment and system equipment. FEATURES * Wide range of selection. * High impedance at applicable frequency. * High self-resonant frequency. PRODUCT IDENTIFICATION UF (1) (2) V - A (3) (4) Y (5) R (6) - 01 (7) (1) Core shape UF: U-type core (2) Dimensional code LengthxHeight (3) External shape code V: Vertical type H: Horizontal type (4) High material (5) Inductance value Example) 133:13mH (6) Rated current value Example) 3R0:3.0A (7) Product management number SELECTION CHART Series Configuration Two sections bobbin types UF Two sections bobbin types (For high frequency) Type Inductance value min. Rated current (A) Handling power LxI2(mHxA2) Weight (g)typ. UF1717V UF1717H UF1717V UF1815SG 0.2 to 10mH 0.2 to 10mH 10 to 60H 50 to 350H 0.25 to 1.6 0.25 to 1.6 1 to 3 1 to 5 0.6 0.6 0.08 1.2 3.5 3.5 3 4.6 Minimum package quantity (pieces/box) 640 480 640 1280 Handling power=(Inductance value)x(Current)2. It is possible to design within the range below this value. [Example] The coil for 2A can make even the inductance of 2.5mH or less a product for handling power 10. * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * All specifications are subject to change without notice. 001-02 / 20110921 / e9_uf_02 (2/4) Two Sections Bobbin Type UF Series FEATURES * This series is compact in size due to its use of high permeability ferrite core. TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 15.5max. 11max. UF1717V/UF1717H(2 SEPARABLE BOBBIN) TYPES SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM 17.5max. 1000 103YR25 17.5max. 12.5max. 1 2 2 4 L1 3 L2 3 Impedance (k) 4 o0.6 (6) 80.5 1 70.5 o0.6 41 41 17max. 100 10 1 282Y0R5 2 3 4 80.5 1 70.5 132Y0R7 201Y1R6 Weight: 3.5g typ. 0.01 0.01 Recommended hole diameter: o1.1 Dimensions in mm Part No. UF1717V-103YR25-02 UF1717V-702Y0R3-01 UF1717V-342Y0R4-01 UF1717V-282Y0R5-01 UF1717V-152Y0R6-01 UF1717V-132Y0R7-01 UF1717V-601Y1R0-01 UF1717V-201Y1R6-01 UF1717H-103YR25-01 UF1717H-702Y0R3-01 UF1717H-342Y0R4-01 UF1717H-282Y0R5-01 UF1717H-152Y0R6-01 UF1717H-132Y0R7-01 UF1717H-601Y1R0-01 UF1717H-201Y1R6-01 0.1 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Inductance (mH)min. 10 7 3.4 2.8 1.5 1.3 0.6 0.2 10 7 3.4 2.8 1.5 1.3 0.6 0.2 601Y1R0 0.1 DC resistance ( )max. 3.5 2.5 1.3 1 0.55 0.5 0.2 0.1 3.5 2.5 1.3 1 0.55 0.5 0.2 0.1 Rated current Iac(A)max. 0.25 0.3 0.4 0.5 0.6 0.7 1 1.6 0.25 0.3 0.4 0.5 0.6 0.7 1 1.6 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M ) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering temperature1 3505C, 5sec max. Soldering iron method Electrical Appliance and Material Safety Applicable safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES UF1717V UF1717H 640pieces/box 480pieces/box * All specifications are subject to change without notice. 001-02 / 20110921 / e9_uf_02 (3/4) Two Sections Bobbin Type(For High Frequency) UF Series FEATURES * This series is designed to reduce stray capacity between windings by using a single-layer coil construction on Ni-Zn ferrite cores, which offer excellent high frequency characteristics. * This series provides excellent noise suppression for high frequency ranges including the FM band. * Since the windings are divided into two sections, this filter can also be used as a signal line with excellent withstanding voltage. 80.5 4 2 3 11max. 1 300Y1R2 1 4 L1 Impedance (k) 17max. 1 41 10 600Y1R0 17.5max. o0.6 70.5 UF1717V(2 SEPARABLE BOBBIN FOR HIGH FREQUENCY) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS L2 2 3 Weight: 3g typ. Recommended hole diameter: o1.1 Dimensions in mm 200Y2R0 0.01 0.001 0.01 Part No. UF1717V-600Y1R0-03 UF1717V-300Y1R2-03 UF1717V-200Y2R0-03 UF1717V-100Y3R0-03 DC resistance (m )max. 300 150 100 50 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES UF1717V 0.1 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Inductance (H)min. 60 30 20 10 100Y3R0 0.1 640pieces/box Rated current Iac(A)max. 1 1.2 2 3 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M ) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering temperature1 3505C, 5sec max. Soldering iron method Electrical Appliance and Material Safety Applicable safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. * All specifications are subject to change without notice. 001-02 / 20110921 / e9_uf_02 (4/4) Two Sections Bobbin Type(For High Frequency) UF Series FEATURES * This series uses a Mn-Zn ferrite core and yet it offers excellent noise suppression into the high frequencies due to its low distributed inductance construction based on a single layer winding. * This compact filters's inductance has been improved by as much as 50% compared to exsting products of compareble size while its hight profile has been reduced by approximately 30%. UF1815SG(2 SEPARABLE BOBBIN FOR HIGH FREQUENCY) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 18max. 17max. 15.5max. 3.50.5 10 351Y1R0 1 4 L1 2 130.5 3 2 L2 1 181Y1R6 3 Impedance (k) 4 100.5 1 o0.7 281Y1R2 Weight: 4.6g typ. Recommended hole diameter: o1.2 Dimensions in mm 151Y2R2 0.1 800Y3R0 650Y4R0 500Y5R0 0.01 0.001 0.01 Part No. UF1815SG-351Y1R0-01 UF1815SG-281Y1R2-01 UF1815SG-181Y1R6-01 UF1815SG-151Y2R2-01 UF1815SG-800Y3R0-01 UF1815SG-650Y4R0-01 UF1815SG-500Y5R0-01 DC resistance (m )max. 300 250 130 100 50 30 25 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES UF1815SG 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Inductance (H)min. 350 280 180 150 80 65 50 0.1 1280pieces/box Rated current Iac(A)max. 1 1.2 1.6 2.2 3 4 5 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (M ) DC.500V Temperature rise(C) 45max. With line resistance Operating temperature Including self-temperature -20 to +120 range(C) rise Storage temperature -20 to +85 range(C) 2605C, 101sec Solder bath method Resistance to soldering temperature1 3505C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard2 1 Pb free solder(Sn-3Ag-0.5Cu) 2 However, this product is not recognized by each regulations. * All specifications are subject to change without notice. 001-02 / 20110921 / e9_uf_02